AVENO CLP 460
AVENO CLP 460 is produced on a basis of high-quality mineral oils and proven additives. Thanks to its special combination of ingredients, it achieves a stable, high-pressure capacity under impact loads. Due to the low pour point of AVENO CLP 460, the cold behavior of this product is excellent.
AVENO CLP 460 has very good properties as a lubricant. AVENO CLP 460 can therefore be used in largely all industrial areas under stress and impact loads.
DIN 51 517 Teil 3
Practice and tested in aggregates with filling:
AGMA 9005-D94, Cincinnati Milacron, Clean Panel Coker, S-200 Oxidation Tubes, US Steel 224
- A stable, high-pressure capacity under impact loads
- An excellent cold behavior
- A low pour point
- An excellent wear protection
- Inhibits rust and corrosion
- Prevents foam formation
|kinematic viscosity at 40°C||435,000||MM²/S||DIN ISO 51562-2|
|kinematic viscosity at 100°C||28,820||MM²/S||DIN ISO 51562-2|
|viscosity index||93||DIN ISO 2909|
|density at 15°C||903,0||KG/M³||DIN EN ISO 12185|
|Pour Point||-9||°C||ASTM D 7346|
All information on this product page complied to the best of our knowledge and developments of Deutsche Ölwerke Lubmin GmbH.
Our products are continuously developed. For this reason, our products, manufacturing processes and all related information on this product page may change at any time and without notice, unless customer-specific agreements exist.
The published data are based on standardized test procedures under appropriate laboratory conditions and are to be regarded as general, non-binding guidelines.
This oil belongs after use in a waste oil collection point! Improper disposal of waste oil endangers the environment! Any admixture of foreign substances such as solvents, brake fluids and coolants is prohibited. Non-contaminated packages may be recycled.