AVENO CGLP ISO 150
AVENO CGLP ISO 150 is a mineral CGLP slide way oil. It is distinguished by its special lubrication and sliding properties and its high adhesiveness. Therefore it is particularly suitable for the lubrication of plain and slide ways. AVENO CGLP ISO 150 is created with mineral base oils and contains additives and corrosion inhibitors to prevent rust and staining of the plain and slide ways. AVENO CGLP ISO 150 is largely resistant to watery metalworking fluids such as drilling, cutting and sanding emulsions and solutions. The lubricant film is not washed off by these fluids.
AVENO CGLP ISO 150 is suitable for all types of lubrication such as pressure, circulation and central lubrication, for splash and pressure running lubrication, as well as lubrication by hand with an oil can. It is also suitable as a bearing and gearbox lubricant.
AFNOR E 60-203 L-G, DIN 51502 (CGLP), DIN 51517-3, DIN 51524-2, GB 11118.1-94 L-HM, ISO 11158 HM, ISO 6743-6 CKC, SAE MS1007 Typ E, SH/T 0361-98 L-G
- Very good stick-slip behavior
- Excellent corrosion protection, no rust or staining
- Resistant to wattery metalworking fluids
- Good demulsification characteristics
|kinematic viscosity at 40°C||157,200||MM²/S||DIN ISO 51562-2:1988-12|
|kinematic viscosity at 100°C||15,400||MM²/S||DIN ISO 51562-2:1988-12|
|viscosity index||99||DIN ISO 2909:2004-08|
|density at 15°C||888||KG/M³||DIN EN ISO 12185:1997-11|
|Pour Point||-18||°C||ASTM D 7346:2015|
All information on this product page complied to the best of our knowledge and developments of Deutsche Ölwerke Lubmin GmbH.
Our products are continuously developed. For this reason, our products, manufacturing processes and all related information on this product page may change at any time and without notice, unless customer-specific agreements exist.
The published data are based on standardized test procedures under appropriate laboratory conditions and are to be regarded as general, non-binding guidelines.
This oil belongs after use in a waste oil collection point! Improper disposal of waste oil endangers the environment! Any admixture of foreign substances such as solvents, brake fluids and coolants is prohibited. Non-contaminated packages may be recycled.