AVENO Circulating Oil CL 320
AVENO CL Circulating Oil 320 is produced on a basis of high-quality mineral oils and proven additives. Thanks to its special combination of active ingredients, it is suitable for use as a simple machine lubricant where no EP-additive oils are required.
AVENO CL Circulating Oil 320 has very good properties as a lubricant. Therefore AVENO CL Circulating Oil 320 can preferably be used for industrial gears and circulation systems of low and medium loads, where lubricants are required in accordance with DIN 51517-2.
DIN 51517-2 CL
- A mild additive and is therefore particularly suitable for old machines
- A good wear protection
- Inhibits rust and corrosion and protects against ferrous metal corrosion
- Prevents foam formation
- Good water separation characteristics
|kinematic viscosity at 40°C||328,700||MM²/S||DIN ISO 51562-2:1988-12|
|viscosity index||95||DIN ISO 2909:2004-08|
|density at 15°C||898||KG/M³||DIN EN ISO 12185:1997-11|
|Pour Point||-24||°C||ASTM D 7346:2015|
All information on this product page complied to the best of our knowledge and developments of Deutsche Ölwerke Lubmin GmbH.
Our products are continuously developed. For this reason, our products, manufacturing processes and all related information on this product page may change at any time and without notice, unless customer-specific agreements exist.
The published data are based on standardized test procedures under appropriate laboratory conditions and are to be regarded as general, non-binding guidelines.
This oil belongs after use in a waste oil collection point! Improper disposal of waste oil endangers the environment! Any admixture of foreign substances such as solvents, brake fluids and coolants is prohibited. Non-contaminated packages may be recycled.