AVENO Gear Extra 85W-140
AVENO Gear Extra 85W-140 multigrade hypoid gear oil of highest stability and oxidation resistance. Its EP additives show a stable lubricating film even at the highest load on the tooth flanks and a high sliding component and reduce wear. It is mainly used in heavily loaded hypoid gears with extreme operating conditions. It is the ideal transmission fluid for differential and differential in the rear axle.
AVENO Gear Extra 85W-140 is used in maximum duty, hypoid-geared gears such as axle drives and manual gearboxes.
API GL-5, MIL-L-2105 D
Practice and tested in aggregates with filling:
DAF, Ford M2C-9002-A, GM, Mack GO-CS 3000B, Mack GO-G, MAN 342 Typ M1, Scania STO 1:0, VOLVO 97310, ZF TE-ML 05A/21A/16D/12E
- Very good oxidation stability
- No foam formation
- Low pour point
- Protection against rust and corrosion
|Kinematic Viscosity at 40°C||348,7||MM²/S||DIN ISO 51562-2:1988-12|
|Kinematic Viscosity at 100°C||26,5||MM²/S||DIN ISO 51562-2:1988-12|
|Viscosity Index||101||DIN ISO 2909:2004-08|
|Density at 15°C||897||KG/M³||DIN EN ISO 12185:1997-11|
|Pour Point||-24||°C||ASTM D 7346:2015|
All information on this product page complied to the best of our knowledge and developments of Deutsche Ölwerke Lubmin GmbH.
Our products are continuously developed. For this reason, our products, manufacturing processes and all related information on this product page may change at any time and without notice, unless customer-specific agreements exist.
The published data are based on standardized test procedures under appropriate laboratory conditions and are to be regarded as general, non-binding guidelines.
This oil belongs after use in a waste oil collection point! Improper disposal of waste oil endangers the environment! Any admixture of foreign substances such as solvents, brake fluids and coolants is prohibited. Non-contaminated packages may be recycled.